EC-200-PP Side-Stream Particle Precipitator
Closed Loops with hydronic heating water, chilled water and condensate return water
The smallest of the ElectroCell product line, the EC-200-PP is designed for Closed Loop Systems like hydronic heating water, chilled water and condensate return water.
ElectroCell’s patented technology incorporates three stages in the process of removing solids. The EC-200-PP is not a mechanical separator or media filter with backwash cycles; it is a particle precipitator that will typically remove 98-99% of all suspended solids down to 1 micron.
The EC-200-PP is designed to perform for 15 years and is easy to maintain, requiring approximately 20 minutes every 90 days to rinse the static mixers in a utility sink and wipe the electrodes clean. There are no parts to replace. This unit plugs into a 120V receptacle and uses less than 1 amp.
Note: EC-200-PP units installed on Chilled Water Systems must be insulated
Specifications
Weight
600 lbs
Footprint
60″L x 32″W x 60″H
Construction
Steel w/Stainless Steel Vessels
2″ Inlet and Outlet
1.5″ Drain w/flow meter
Electrical
120V AC, <1` Amp
Pressure
150 psi max (Optional 300 psi avail)
Temp Range
50°F to 200°F
GPM
30-70 GPM
Components
Two Stainless Steel Vessels
Two Static Mixers
One Pre-Treatment Electrode
One High Voltage Power Supply
One High Voltage Electrode
Two Auto-bleed/purge Actuated Valves
One Programmable Clock (Closed Loop)
Conductivity Meter Interface (Open Loop)
120VAC Plug (typical receptacle)
Optional Circ Pump (typically not needed)
